How to Reset Maintenance Light on Toyota Camry? Quick Reset!
If you changed your oil but the maintenance light is still on, you are not alone. Many Camry owners get confused, because Toyota uses different reset systems for different model years and dashboards. Older models rely on the Trip A button, while newer ones use fully digital menu controls.
This guide goes through each generation in turn, so you can reset the oil-change reminder correctly and keep your service tracking on track.
In Short
You reset the light with the trip/ODO button on older models, or with the steering-wheel controls and the screen on newer models. The exact steps for your year are in the sections below. Only reset it after the service is really done.
What Does the Maintenance Required Light Mean on a Toyota Camry?
This light is simply a mileage reminder. It usually comes on every 5,000 miles to remind you about routine service, most often an oil change. It does not check the condition of your oil, and it does not mean your engine is damaged.
Some other brands, such as Honda and GM, watch driving conditions and temperature to judge oil life. Toyota does it differently, with a fixed mileage system. The Camry reminder follows set intervals instead of working out oil wear as you drive, which keeps it simple and the same across model years.
It is built into the instrument cluster as part of Toyota’s service-interval reminder system.
How Many Miles Trigger the Maintenance Light?
Most US models are set to come on 5,000 miles after the last reset. First it blinks when you start the car, then it stays on all the time. If you reset it during a service visit, the count starts again from zero.
| Mileage Since Last Reset | What Happens |
| Around 4,500 miles | Light blinks at startup |
| 5,000 miles | Light stays solid |
| After reset | Counter restarts from zero |
During a real service visit, reset the reminder only after the oil and filter have both been changed. That way the next interval is counted from the service itself.
How Do You Reset the Maintenance Light on a Toyota Camry?
The reset itself is simple, but the exact steps depend on your dashboard type and model year.
First, turn the ignition to ON or accessory mode without starting the engine. Switch the display to Trip A, then hold the trip reset button until the display counts down and returns to 000000. Release the button once the mileage appears again.
How Do You Reset the Light on 2002 to 2006 Camry Models?
These older models use a simple odometer button.
- Turn the key to the ON position
- Set the display to ODO, not Trip
- Turn the key off
- Hold the trip button and turn the key back to ON
- Wait until the dashes disappear
Let go of the button when the numbers reset.
How Do You Reset the Light on 2007 to 2017 Camry Models?
This generation uses the Trip A method. Many owners miss this small detail, so check the display before you start.
- Switch to Trip A
- Turn the ignition off
- Hold the trip button
- Turn the ignition to ON
- Wait for the countdown to finish
If Trip B is selected, it will not reset. The system only accepts Trip A, so that setting matters.
How Do You Reset the Light on 2018 to 2024 Camry Models?
These models use a Multi-Information Display (MID) with steering wheel controls, especially on trims with push-button start.
Go to Settings → Vehicle Settings → Maintenance Reset → Confirm Yes.
On most trims with push-button start, the physical trip button no longer controls the reset. The system uses the digital menu instead.
How Do You Reset the Light on 2025 to 2026 Camry Models?
The 2025 redesign brought a fully digital cluster. Every trim is now hybrid-only.
Use steering wheel arrows to enter:
Settings → Vehicle Settings → Scheduled Maintenance → Reset → Confirm.
The reset happens straight away. No trip button method works on these models.
How Is the Reset Process Different on Hybrid Models?

Older hybrids, from before 2018, use the same trip reset system as petrol models.
Newer hybrids, from 2018 to 2026, use the digital screen menu. Because the cluster is electronic, you must follow the on-screen steps and confirm the reset.
Many drivers try the old button method first, and it simply does not work on newer models.
Not sure which fuel keeps your Camry running well?
Read Guide: Toyota Camry Gas Type
Why Is the Maintenance Light Blinking Instead of Staying Solid?
A blinking service light means you are close to the service interval. A solid light means it is time for service.
| Light Behavior | Meaning |
| Blinks for a few seconds | Service due soon |
| Stays solid | Service overdue |
| Does not turn off after reset | Reset not completed properly |
This system has stayed the same from 2007 through 2026 models.
Why Won’t the Maintenance Light Reset?

It is usually one of these:
- The wrong trip mode is selected
- The ignition is not in the proper ON mode
- The button is released too early
- The digital reset is not confirmed
If it still will not reset, disconnecting the battery will not reliably fix it on newer models. The counter is stored in the instrument cluster memory, not in the battery.
Authorized Toyota dealers recommend this quick odometer button method for older Camrys.
If the Light Will Not Reset
- Check the ignition was in the right position and repeat the steps slowly.
- Make sure the service itself was done. The light is a reminder, not the fault.
- If it still stays on, a dealer or a shop with a scan tool can reset and check it.
Is the Maintenance Light the Same as the Check Engine Light?

No. They are quite different.
The maintenance light is only a reminder. The check engine light is linked to engine sensors and fault codes, and it points to a real problem that needs checking.
If the check engine light is on, resetting the maintenance reminder will not turn it off.
Should You Reset the Light Before an Oil Change?
No. Always reset it after the service is finished.
If you reset it early, the 5,000-mile cycle starts again. That can throw off your maintenance tracking and may leave you overdue for the next service without realising it.
Can You Drive With the Maintenance Light On?
Yes, but only if it is just a reminder.
It does not mean your engine is damaged. Still, driving thousands of miles past the interval increases wear, especially if your oil is old.
For example, many daily commuters ignore the reminder for a week or two without trouble, but going far beyond the interval is risky.
Read Guide: Why 2011 Toyota Camry Shut Off When Stopping?
Does Disconnecting the Battery Reset the Maintenance Light?
On very old Camry models, sometimes yes.
From 2018 to 2026, on digital cluster models, no. The reminder data is stored electronically and will survive a battery disconnect.
Using the right reset procedure for your model year avoids needless frustration.
FAQs:
Does the maintenance light mean something is wrong with the engine?
No. It is a mileage-based service reminder, not a fault warning.
Can I drive my Camry with the maintenance light on?
Yes, but book routine service soon to protect engine performance.
Does the maintenance light turn off automatically after an oil change?
No, you must reset it by hand after the service is finished.
Is the reset process different for 2025 to 2026 Camry models?
Yes, newer models use a fully digital menu instead of the trip button.
Does disconnecting the battery clear the maintenance light?
No, modern Camry models keep the reminder data in the instrument cluster memory.
Conclusion:
Resetting the maintenance light on a Toyota Camry is simple once you know your model year and dashboard type. It is just a mileage reminder, and with the right steps you can do it in minutes, without a mechanic.
For other routine Camry care, see how to change the cabin air filter in a Toyota Camry and Toyota Camry for model information.
Read Next: What Does TPMS Mean on a Toyota Camry? (Easy Explanation)

6 Comments